Fujitsu SPARC EnterpriseM3000 User Manual

Chapter 8 Upgrade of XSCF Firmware and Maintenance 8-11
Making Versions Agree With Each Other
XSCF automatically sets firmware versions to match each other as follows:
■ When power to a domain is turned on, the versions on the system boards in the
domain are automatically set to match each other.
■ When a system board is moved to a domain by the DR function, the version on
the board is automatically matched to the version in the destination domain.
■ When a maintenance component is replaced or added, the version is
automatically matched to the version of the firmware currently running.
8.1.10 Firmware Update Procedure
TABLE 8-2 outlines the firmware update tasks. Detailed descriptions are provided at
the link destinations of each task item.
Note – Depending on the XCP version and system configuration, firmware update
procedures and requirements might be slightly different. For information about
specific firmware update procedures and requirements, refer to the Product Note
about your server.

Fujitsu SPARC EnterpriseM3000 Specifications

General

Brand	Fujitsu
Model	SPARC EnterpriseM3000
Category	Server
Language	English