Appendix B XSCF Log Information B-5
■ Time at which the problem was registered in the log (TIME).
■ Universal Unique Identifier that can be used to uniquely identify the problem in
an optional system set (UUID)
■ Message ID (MSG-ID) that can be used to access the corresponding description of
information at the specified site
2. Use the message ID for accessing the specified URL to acquire detailed
information corresponding to this problem. For the specified URL, see the web
site information about the messages described in the Product Notes for your
server. The information that can be referenced for the message ID is the same
as that described in the item of showlogs(8) error.
3. After confirming the problem, repair the fault according to the recommended
processing.
For details of the fmdump(8) command, see the XSCF Reference Manual or the main
page.
B.2 Power Log
When a power operation or resetting is performed in the server or domain, the XSCF
firmware collects a power log. This section explains how to reference the power log.
See
TABLE 8-3 for the size and generation number of a power log.
Using the showlogs(8) Command to Reference Power Logs
● Specify the power option on the XSCF Shell and perform the showlogs(8)
command to reference power logs.
To Next Page
Loading...
Need help?
General