Chapter 4 Operation of the Server 4-11
3. Use the showboards(8) command to check the XSB number, domain ID, LSB
number, and XSB status.
4. Use the version(8) command to check the OpenBoot PROM version of a
domain.
4.3 Adding or Removing Domains
The system can adopt a domain configuration by combining multiple system boards
in a server. Each domain can operate independently.
To configure domains for a server, use the XSCF Web console or the XSCF Shell
commands.
Note – In the M3000 server, the domain configuration policy can be changed by
using the setdcl(8) command. However, other domain configurations cannot be
changed.
Commands Used to Setup or Display Information
Execute the following commands individually, as appropriate. For details of these
commands, see Chapter 5.
â– setdcl
â– setupfru
â– addboard
XSCF> showboards -a
XSB DID(LSB) Assignment Pwr Conn Conf Test Fault
---- -------- ----------- ---- ---- ---- ------- --------
00-0 00(00) Assigned y y y Passed Normal
00-1 00(01) Assigned y y y Passed Normal
00-2 SP Available y n n Passed Normal
00-3 02(00) Unavailable y n n Unknown Normal
XSCF> version -c cmu
DomainID 0: 02.09.0000
DomainID 1: 02.09.0000
:
DomainID 3: 02.09.0000
To Next Page
Loading...
Need help?
General