4-12 SPARC Enterprise Mx000 Servers XSCF User’s Guide • January 2012
■ deleteboard
■ moveboard
For details on adding or changing a domain, see Chapter 2 of the XSCF Reference
Manual or the Administration Guide.
For details on using the DR function to change the domain configuration, see the
Dynamic Reconfiguration User’s Guide.
4.4 Server and Domain Power Operations
This section describes power operations for servers and domains, and it explains
how to display the power status of a server or domain.
To perform the power operations, use the XSCF Shell commands.
Commands Used for the Operations or Status Display
Execute the following commands individually, as appropriate. For details of these
commands, see Chapter 5.
■ poweron
■ poweroff
■ reset
■ sendbreak
■ setpowerupdelay
■ showpowerupdelay
■ setshutdowndelay
■ showshutdowndelay
■ setdualpowerfeed
■ showdualpowerfeed
With the power operations, the following can be performed:
■ System power on
■ System power off
■ Domain power on
■ Domain power off
■ Sending a Domain Panic Request (Solaris OS dump request)
To Next Page
Loading...
