Fujitsu SPARC EnterpriseM3000 User Manual

2-106 SPARC Enterprise Mx000 Servers XSCF User’s Guide • January 2012
To enable the SSH, to set the SSH access control from domain, and to disable the
telnet, the XSCF reset is required. Please reset the XSCF using by rebootxscf(8)
command. After the XSCF reset, the XSCF session is disconnected. Please log in
again to the XSCF. The SSH or telnet settings are automatically applied to the
standby XSCF Unit for a system with a redundant XSCF configuration.
In this system, the RW or RO consoles from multiple domains can be used. Only one
RW console can be used for each domain. Use the console(8) command to specify
either the RW console or RO console as a domain console. For details about consoles,
see Chapter 3.
Host key Generates an SSH2 host key (RSA key and
DSA key).
setssh When the SSH is enabled
first, the host key is
generated.
The DSA key length is
1024 bits.
The RSA key length is 1024
bits by default.
Either 2048 or 1024 can be
specified for RSA key
length.
Display
telnet setting
information
Displays telnet settings.
The displayed telnet settings include
information indicating whether telnet is
enabled or disabled.
showtelnet The telnet port number is
23.
Enable/
disable telnet
Enables or disables telnet. settelnet The telnet is disabled by
default.
Display
timeout
Display the timeout period for automatic
logout.
showautologout
timeout After logging in XSCF, if the system is not
used for a certain period, logout is
automatically performed. Specify the timeout
period (minutes). Note that no time
monitoring is performed while the domain
console is the current console.
setautologout The default timeout period
is 10 minutes. A value
ranging from 1 to 255 can
be specified for the
timeout period.
Install/
Uninstall
user public
key
Install and uninstall the SSH user public key.
One user can install multiple user public
keys.
setssh When you install/
uninstall the user public
key, the useradm privilege
is required.
TABLE 2-13 SSH/Telnet Administration (Continued)
Item Description Shell command Remarks

Fujitsu SPARC EnterpriseM3000 Specifications

General

Brand	Fujitsu
Model	SPARC EnterpriseM3000
Category	Server
Language	English