Fujitsu SPARC EnterpriseM3000 User Manual

2-122 SPARC Enterprise Mx000 Servers XSCF User’s Guide • January 2012
Note – (1) If audit is disabled, writing to the audit trail is stopped, all requests to the
log file transfer to the log archive function are also stopped. When audit is enabled,
writing restarts. Rebooting the system disables and then enables access auditing.
Also, the local audit file of XSCF have the primary and secondary files. The data is
kept as is even if you perform archiving unless it exceeds the threshold of audit file.
Therefore, the usage of the audit file never becomes 0.
Note – (2) For detail of global policy, see the Administration Guide.
Note – (3) If an audit trail becomes full while suspend is specified, XSCF Shell or
XSCF Web operation will be locked; you will not be able to complete the operation.
Writing any further entries to the audit trail stops until you either clear out some
audit trail space, or the until the audit policy is changed to count.
Display audit
trail
Displays an audit trail.
To display an audit trail, select one of the items
listed below.
Data is displayed in units of audit records.
• Records after the specified time
• Records before the specified time
• Records the specified range of time
• Records on a specific date (24 hours of
records on that date in local time)
• Audit class
• Audit event
• Audit session ID
• User privilege
• Return value (success, failure, or none)
• User (name or UID)
Also, to display an audit trail, specify the
following formats:
• Line by line printing
• Delimiter specified (The default delimiter is
the comma.)
• Suppressing conversion of UIDs into user
names and IP addresses into hostnames
• Printing in XML format
(Note 5)
viewaudit • To use a delimiter as part of
input data, enclose it in
quotation marks. Up to
three delimiters can be
used.
• The return values are as
follows:
Success: 0
Failure: Other then 0
none: No return value
("none" indicates that no audit
token has a return value.)
TABLE 2-17 Audit Administration (Continued)
Item Description Shell Command Remarks

Fujitsu SPARC EnterpriseM3000 Specifications

General

Brand	Fujitsu
Model	SPARC EnterpriseM3000
Category	Server
Language	English