5-6 SPARC Enterprise Mx000 Servers XSCF User’s Guide • January 2012
showenvironment Displays the temperature, humidity, voltage, fan rotation speed, power
consumption, and exhaust airflow.
showstatus Lists degraded components.
showhardconf Displays all components mounted in the server.
poweron Turns on power to all domains or the specified domain.
poweroff Turns off power to all domains or the specified domain.
reset Resets the specified domain.
Note: The following three reset modes are available:
por: Domain system reset
request: Domain panic instruction
xir: Domain CPU reset
setpowerupdelay Sets the warm-up time and the air-conditioning wait time.
showpowerupdelay Displays the warm-up time and the air-conditioning wait time settings.
setshutdowndelay Sets the UPS shutdown delay time at power failure.
showshutdowndelay Displays the UPS shutdown delay time at power failure.
setdualpowerfeed Sets the dual power feed.
showdualpowerfeed Displays the dual power feed.
setlocator Enables or disables the CHECK LED blinking.
showlocator Displays the LED status.
switchscf Switches the XSCF Unit state (Active/Standby).
ioxadm Configures the External I/O Expansion Unit (IOBOX).
Displays the External I/O Expansion Unit settings.
clockboard Sets/Displays the number of clock unit (CLKU) used when the next platform is
powered on.
setdomparam Rewrites the OpenBoot PROM environment variable that is compulsory.
getflashimage Gets the firmware update program.
flashupdate Updates the firmware program.
version Displays the comprehensive firmware (XCP) version.
Displays the XSCF firmware version.
Displays the OpenBoot PROM firmware version.
prtfru Displays the FRU-ROM data.
dumpconfig Saves XSCF configuration information to the specified destination.
restoreconfig Restores XSCF configuration information from the specified destination.
TABLE 5-1 XSCF Commands (Continued)
Command Description
To Next Page
Loading...
Need help?
General