Fujitsu SPARC EnterpriseM3000 User Manual

Contents vii
3.2.1 Connecting XSCF via the XSCF-LAN Port Or the Serial Port 3–12
3.2.2 XSCF-LAN and Serial Connection Purposes 3–15
4. Operation of the Server 4–1
4.1 Display Server Hardware Environment 4–1
4.1.1 Displaying System Information 4–2
4.1.2 Display Server Configuration/Status Information 4–6
4.2 Display Domain Information 4–9
4.2.1 Domain Information 4–10
4.3 Adding or Removing Domains 4–11
4.4 Server and Domain Power Operations 4–12
4.4.1 System Power On 4–13
4.4.2 System Power Off 4–14
4.4.3 Domain Power On 4–15
4.4.4 Domain Power Off 4–16
4.4.5 Sending a Domain Panic Request 4–17
4.4.6 Domain Reset 4–18
4.4.7 Sending a Break Signal to a Domain 4–19
4.4.8 Air-Conditioning Wait Time Administration 4–20
4.4.9 Warm-Up Time Administration 4–21
4.4.10 Shutdown Wait Time Administration 4–22
4.4.11 Dual Power Feed Administration 4–22
4.5 Identifying the Location of the System 4–24
4.6 Managing Fault Degradation 4–24
4.6.1 Displaying the Degraded Component 4–24
4.6.2 Clearing the Fault/Degradation Information 4–25
4.7 Changing the Time 4–26
4.8 Switching the XSCF Unit 4–26

Fujitsu SPARC EnterpriseM3000 Specifications

General

Brand	Fujitsu
Model	SPARC EnterpriseM3000
Category	Server
Language	English