Furuno FELCOM 15 - 5.11 Saving and loading of system setting

4. INMARSAT C COMMUNICATIONS
4-2
Message language, subscriber, destination type and code
Message Subscriber Destination Type Code Remarks
Inmarsat C MES Telex IA5
Telex Telex ITA2
Fax PSTN IA5 Modem type “T30”
English
E-mail E-mail IA5
Inmarsat C MES PSDN DATA
Fax Not available
Russian
E-mail E-mail DATA
Inmarsat C MES PSDN DATA
Telex Not available
Fax Not available
Japanese
E-mail E-mail DATA
Inmarsat C MES PSDN DATA Data
Land Network PSDN DATA
4.1.2 Transmitting prepared message
This section explains how to transmit a message you have just prepared, via fax,
telex, e-mail or SMS. For distress transmission, see Chapter 6. For 2-digit code
services, see the table in paragraph 4.1.6.
Transmitting a message to a station registered on station list
1. Prepare message on the screen. For e-mail or SMS, set Text Mode in the
Editor Setup menu to Ascii. See paragraph 3.2.3. For e-mail attachment,
prepare the attachment and save it to a floppy disk. SMS messages over
160 characters in length are sent in parts.
2. Press the [F3] key to display the Transmit menu.
25 Char. [ Line 2/ 2 Col. 1 ]
<[1] UNTITLED1>
TELEX
----
*
--------- + --------- + --------- + --------- + --------- + --------- + --------- <
[Insert ]
Transmit
1. Transmit Message
2. Cancel
3. Request Delivery Status
File Edit Transmit EGC Reports Logs Options Setup Position StopAlarm
Transmit menu