3. FILE OPERATIONS
3-20
3.10 Decoding E-mail Attachment
When you can't read an e-mail attachment because it has been coded by MIME
(Multipurpose Internet Mail Extensions), you may decode it as below.
1. Save the MIME-coded file to a floppy disk. (See paragraph 4.2.5 for the
procedure.) This step is not necessary if Auto Receive Message Save is
turned on in the Auto Mode Setup menu.
2. Press the [F1] key to open the File menu.
3. Press the [9] key to choose MIME(Decode).
File
1. New
2. Open
3. Close
4. Save
5. Delete
6. Rename
7. Print
8. Format Disk
9. MIME (Decode)
ALT-N
ALT-O
ALT-Q
ALT-S
ALT-D
ALT-P
Decode
[A:\E0970715 ]
To View: SPACE Make Dir: INS Remove Dir: DEL
File Edit Transmit EGC Reports Logs Options Setup Position StopAlarm
868
372
6794
864
02-02-25 02:33
02-02-25 02:52
02-02-25 02:59
02-02-25 03:13
Filename Size Date & Time
E0970715.001
E0970715.002
E0970715.003
E0970715.004
4 Files exist 579584 bytes free
Decode window
4. Press the [↑] or [↓] key to choose the file you want to decode.
5. Press the [Enter] key.
MIME Decode
Checking 'E0970715.001'
. . .
Decode 'ABC.ini'?
Decode
Yes No
File chosen at step 4
File attachment
Decode window
6. Yes is selected; press the [Enter] key to decode the file.
File
1. New
2. Open
3. Close
4. Save
5. Delete
6. Rename
7. Print
8. Format Disk
9. MIME (Decode)
ALT-N
ALT-O
ALT-Q
ALT-S
ALT-D
ALT-P
Save
[A:\ABC.ini ]
To View: SPACE Make Dir: INS Remove Dir: DEL
Filename Size Date & Time
E0970715.001
E0970715.002
E0970715.003
E0970715.004
4 Files exist 579584 bytes free
2002-02-25 02:33
2002-02-25 02:52
2002-02-25 02:59
2002-02-25 03:13
868
372
6794
864
Save window
To Next Page
Loading...
