2. SYSTEM INITIALIZATION
2-35
2.9.2 Specifying directory where to store messages
You may specify the directory where to store messages on a floppy disk as
follows:
1. Press the [F8] and [8] keys to show the Directories menu.
2. Press the [↑] key to choose Message Directory and press the [Enter] key.
Setup
Directories
Message Directory
EGC M<DIR><essa>456ABC <DIR>
e <DIDirectory
Message Directory
[A:\ ABC\ . ]
Filename Size Date & Time
・ABC281 .
・・
<DIR>
<DIR>
2002-02-28 20:54
2002-02-15 02:13
Root directory
(Top of floppy disk hierarchy)
Message directory
3. Press the [↓] key to place the cursor on [●●].
4. Press the [Enter] key. Root directory is displayed.
5. Press the [↓] or [↑] key to choose a directory.
6. Press the [Enter] key.
7. Press the [↑] key to place the cursor on the top line ([A: ]). The floppy disk
drive lamp lights.
8. When the floppy disk drive lamp goes off, press the [Esc] key to show the
update window.
9. Yes is selected; press the [Enter] key.
10. Press the [Esc] key twice to return to the standby display.
Note: The directory where to store EGC messages can also be created. In this
case choose EGC Message Directory at step 2.
To Next Page
Loading...
Need help?
General
