Furuno FELCOM 15 Operator's Manual

2. SYSTEM INITIALIZATION
2-31
Station list
Note: You may sort the list by group name, station name or communication
type as follows:
Group name: Each press of [Ctrl] + [G] sorts the list by group name,
ascending or descending order.
Station name: Each press of [Ctrl] + [N] sorts the list by station name,
in ascending or descending order.
Comm. type: Each press of [Ctrl] + [T] sorts the list by communication
type, in ascending or descending order.
2. Press the [↓] or [↑] key to choose a station and then press the [Enter] key.
3. Do one of the following:
Change station name: Press the [↓] or [↑] key to choose Station Name and
then press the [Enter] key. Press the [Backspace] key to erase station name
and then enter new data. Press the [Enter] key.
Delete station: Press the [↓] or [↑] key to choose Station Name and then
press the [Enter] key. Press the [Backspace] key to erase station name and
then press the [Enter] key.
4. Press the [Esc] key to save changes.
5. Press the [Esc] key three times to return to the standby display.
2.7.3 Printing the station list
1. Press [F8], [9] and [1] to display the Station List.
2. While pressing and holding down the [Ctrl] key, press the [P] key to print.
No.
01
02
03
Group Name
x1 abc
x2 xyz
x3 Seagull
Type
E-Mail
E-Mail
TELEX
Dest, ID, Modem / Address
abc@ furuno.co.jp
xyz@ furuno.co.jp
584 463609999
Station List ( Printed at 02-02-25 02:38 )
Remarks
Station Name Subscriber's Number
Country Code
Group Name
Sample station list printout
3. Press the [Esc] key three times to return to the standby display.

Furuno FELCOM 15 Specifications

General

Brand	Furuno
Model	FELCOM 15
Category	Marine Radar
Language	English