5. DATA REPORTING AND POLLING
5-12
5.3 DNID (Data Network Identification)
When you make a contract with an information provider, DNIDs are downloaded
from the information provider to your FELCOM 15, via the appropriate LES.
Up to 64 DNIDs can be downloaded to the FELCOM 15. You can see which
DNIDs are stored as below.
5.3.1 Displaying DNID
It is necessary to contract with an LES to exchange data within a group. The
LES sends a DNID (Data Network Identification) number to each member of the
group. The FELCOM 15 can store 64 DNIDs.
1. Press the [F5] key to display the Reports menu.
2. Press the [3] key to display the Data Network ID list.
Data Network ID
Mark '*' means activation. Ctrl+P: Print
No.
01
02
03
04
05
06
07
08
09
10
Act
*
*
*
*
*
*
*
DNID
00004
00004
23456
03333
03333
07777
09999
LES
101
101
101
101
101
101
101
Subaddr
000
002
002
002
000
000
000
Member
001
003
223
044
044
099
088
Text
* DNID effective
Sub address
Member number using DNID
Data network ID list
Note: Asterisk-marked DNIDs are available for use.
5.3.2 Enabling/Disabling DNID
DNID can be enabled or disabled as follows:
1. Press the [F5] key followed by the [3] key to show the Data Network ID list.
2. Press the [↓] or [↑] key to choose desired DNID from the data network ID list.
3. Press the [Enter] key to enable or disable the DNID as appropriate. An
asterisk appears next to the DNID when it is enabled.
Note: If a DNID is disabled during data reporting, “running data program
(poll)” is displayed and polling is cancelled.
4. Press the [Esc] key twice to return to the standby display.
.
To Next Page
Loading...
