Furuno FELCOM 15 Operator's Manual

4. INMARSAT C COMMUNICATIONS
4-25
4.2.3 Displaying, printing received messages
Received messages (except confidential or password affixed) are automatically
printed when the Auto Receive Message Print in the Auto Mode Setup is turned
on. To print confidential or password affixed messages follow the procedure
below.
If you cannot read an e-mail attachment, because it is MIME-coded, go to
paragraph 3.10.
1. Press the [F6] key to show the Logs menu.
Logs
1. Send Message Log
2. Receive Message Log
3. EGC Log
4. Log
Logs menu
2. Press the [2] key to display the list of received messages.
Received Message Log
Message No.
R0971106.001
R0971105.002
R0971105.001
R0971024.001
LES
KDDI
KDDI
KDDI
KDDI
Priority
Normal
Normal
Distress
Normal
Addressee
CAPTAIN
Rec date & Time
02-02-06 16:10
02-02-05 17:30
02-02-05 14:15
02-01-24 13:20
Status
Saved
Printed
Saved
Memory Available: 12345 Bytes
Size
32767
200
1234
8251
ENTER: Display S: Save D: Delete
Receive message log
Display message list description
Message No.: Received message no.
LES: LES name
Priority: Normal or distress
Size: Size of file in bytes
Addressee: Addressee code appears for confidential messages.
Nothing appears for routine messages.
Rec date & time: Date and time message was received.
Status: Printed: message printed
Saved: message saved to floppy disk
No display: not yet printed confidential message, or
printer malfunction
Memory available: Memory available in the terminal unit
3. Press the [↑] or [↓] key to choose a file. To get a partial display of a file
selected, tap the space bar. Press the [Esc] key after confirming contents.

Furuno FELCOM 15 Specifications

General

Brand	Furuno
Model	FELCOM 15
Category	Marine Radar
Language	English