Furuno FELCOM 15 Operator's Manual

8. E-MAIL BY PC
8-6
8.3.2 Enabling DHCP settings
With DHCP turned on, IP address and subnet mask are automatically assigned
when a DHCP server resides on a LAN. The default DHCP setting is OFF.
Procedure
1. Press [F8] and [2] to show the System Setup menu.
2. Press the [↓] or [↑] key to choose Network Setup and then press the [Enter]
key.
3. Choose Network and then press the [Enter] key.
4. Press the [↓] key to choose DHCP and then press the [Enter] key.
5. Press the [↑] key to choose ON and then press the [Enter] key.
6. Press the [Esc] key to open the update window.
7. Yes is selected; press the [Enter] key to update settings. The message
“Press ESC key to Restart FELCOM15.” appears.
8. Press the [Esc] key to restart.
9. After restarting has been completed, confirm that IP address and subnet
mask have been assigned.

Furuno FELCOM 15 Specifications

General

Brand	Furuno
Model	FELCOM 15
Category	Marine Radar
Language	English