2. SYSTEM INITIALIZATION
2-34
6. Enter directory name and press the [Enter] key. Entered name appears.
Setup
5. EGC Setup
6. Auto Mode Setup
7. E-Mail Setup
8. Directories
9. Configuration
Directories
Message Directory
EGC M<DIR><essa>456ABC <DIR>
e
<D
IDirectory
Message Directory
[A:\ ABC\ . ]
Filename Size Date & Time
.
ABC281 .
. .
<DIR>
<DIR>
2002-02-28 20:54
2002-02-15 02:13
Root directory
(Top of floppy disk hierarchy)
Directory name
Message directory
Note 1: To create a directory within a directory (at step 6), repeat steps 5
and 6.
Note 2: To return to the root directory, place the cursor on [. .] and press the
[Enter] key.
7. Press the [↑] key.
8. When the floppy disk drive lamp goes off, press the [Esc] key to show the
update window.
9. Yes is selected; press the [Enter] key.
10. Press the [Esc] key twice to return to the standby display. Then, received
messages (transmitted messages) are saved to the directory created above.
Note 1: To remove a directory, do steps 1-4 in the above procedure, choose the
directory to remove and then press the [Delete] key.
Note 2: A directory for EGC messages can also be made as above. In this case
choose EGC Message Directory at step 4.
To Next Page
Loading...
Need help?
General
