EasyManua.ls Logo

Furuno FELCOM 15 - AP1.2.4 Distress Alert

Furuno FELCOM 15
228 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5. DATA REPORTING AND POLLING
5-5
9. Press the [] or [] key to choose “ON” or “OFF” as appropriate.
ON: Message report on
OFF: Message report off
10. Press the [Enter] key to close the window.
11. Press the [] key to choose Station Name.
12. Press the [Enter] key to display the Station List.
13. Press the [] or [] key to choose a station.
Note: You may sort the list by group name, station name or communication
type as follows:
Group name: Each press of [Ctrl] + [G] sorts the list by group name,
ascending or descending order.
Station name: Each press of [Ctrl] + [N] sorts the list by station name,
in ascending or descending order.
Comm. type: Each press of [Ctrl] + [T] sorts the list by
communication type, in ascending or descending order.
14. Press the [Enter] key to close the window.
15. For e-mail following a)-d) below. For other communication formats, go to step
16.
a) Press the [] key to choose Subject.
b) Press the [Enter] key to show the title window.
c) Type title.
d) Press the [Enter] key to close the window.
16. Press the [] key to choose LES ID.
17. Press the [Enter] key to display the LES List.
18. Press the [] or [] key to choose an LES.
19. Press the [Enter] key to close the window.
20. Press the [] key to choose Activation.
21. Press the [Enter] key to open the activation options window.
22. Press the [] or [] key to choose “Regular Interval” or “Daily” as appropriate.
23. Press the [Enter] key to close the window.
24. Do one of the following depending on the selection you made at step 22.
“Regular Interval” selected at step 22
(1) Press the [↓] to choose Interval Time.
(2) Press the [Enter] key to open the interval time entry window.
(3) Key in the interval time.
(4) Press the [Enter] key to close the window.
(5) Press the [] key to choose Report Times.
(6) Press the [Enter] key to open the report times entry window.
(7) Key in the report times, or press the [Back Space] key to display “---“ to
choose “No Limit” to transmit data until the “Status” setting is turned OFF.
(8) Press the [Enter] key to close the window.

Table of Contents

Other manuals for Furuno FELCOM 15

Related product manuals