EasyManua.ls Logo

Furuno NAVpilot-711C - Fish Hunter Option Menu

Furuno NAVpilot-711C
176 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7. INITIAL SETTINGS
7-42
7.14 Fish Hunter Option Menu
You can set the parameters for the FishHunter
turns on the [Fish Hunter Option]
menu. To open the [Fish Hunter Option] menu, select [Fish Hunter Option] from the
[Installation Menu] window.
Note: The [Fish Hunter Option] menu is not shown with a sailboat and Fantum Feed-
back
.
Circle
Rate of Turn: 3 °/s
Orbit
Radius: 0.05 NM
SPIRAL
Speed: 0.5 kn
Radius: 0.05 NM
Figure 8
Radius: 0.05 NM
Square Turn
Side Length: 1.0 NM
Azimuth: Auto
Zigzag
Turn Angle: 90 °
Termination: Continuous
Distance:
Number of Turns:
Width: 0.5 NM
Distance
Continuous
Number of Turns
Manual
Auto
Fish Hunter Option
Circle
Orbit
Spiral
Figure 8
Square Turn
Zigzag
< Setting range >
Setting range depends on units
set on the [Unit Setup] menu.
1°-5°/s
0.05-9.99 NM
[Speed]: 0.1-2.0 kn
[Radius]: 0.05-9.99 NM
0.05-9.99 NM
[Turn Angle]: 3-150°
[Number of Turns]: 1-20
([Termination] = [Number of Turns])
[Distance]: 1-99 NM
([Termination] = [Distance])
[Width]: 0.1-9.9 NM
[Side Length]: 1.0-9.9 NM
[Azimuth]: 0-359° ([Manual])

Table of Contents

Other manuals for Furuno NAVpilot-711C

Related product manuals