Furuno NAVpilot-711C - Dodge-Type Remote Controller (FAP-6231, FAP-6232)

2. STEERING MODES
2-28
2.10.3 Dodge-type remote controller (FAP-6231, FAP-6232)
The dodge-type remote controller does not have a power switch.
Operate it by simply pressing the direction buttons. The dodge-
type remote controller sets your course and rudder is moved to
steer the set course.
The dodge-type controller can be used in the AUTO and NAV
mode. While you operate the dodge-type controller,
“ “appears on the controller unit.
To use this function, set the remote mode of the remote control-
lers to [Dodge] on the [RC Setup] menu (see section 7.17).
PORT
STBD