Furuno NAVpilot-711C User Manual

2. STEERING MODES
2-16
Zigzag turn
When you select the zigzag turn while in the NAV mode or from the TLL menu (see
section 2.8), the waypoint name and NAV or TLL icon appears instead of the termina-
tion condition.
2.6.2 Types of FishHunter
™
turns
Circle turn
The circle turn can be used for circling fish or a particular object on the seabed. The
rate of turn for the circle can be selected from the menu, but it cannot be higher than
that set at installation. This turn can be affected by tide and wind.
Turn angle
䋨
See section 2.6.3.
䋩
Turn angle
䋨
See section 2.6.3.
䋩
Ship markShip mark
Termination condition
䋨
See section 2.6.3.
䋩
Termination condition
䋨
See section 2.6.3.
䋩
Turn width
䋨
See section 2.6.3.
䋩
Turn width
䋨
See section 2.6.3.
䋩
Waypoint name
NAV icon
TLL icon
When the turn is selected in the NAV mode
When the turn is selected from the TLL menu
Waypoint name
Specified turn rate
Bow direction
Heading

Furuno NAVpilot-711C Specifications

General

Brand	Furuno
Model	NAVpilot-711C
Category	Autopilot System
Language	English