EasyManuals Logo

Furuno NAVpilot-711C User Manual

Furuno NAVpilot-711C
176 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
2. STEERING MODES
2-17
Orbit turn
In the AUTO mode, your boat orbits around its current position. For the NAV mode,
the boat orbits around the (last) waypoint. This function requires a chartplotter or GPS
navigator.
Spiral turn
The boat spirals in the direction of current heading (STBY), set course (AUTO) or the
course to the next waypoint (NAV) that was active at the moment that the spiral turn
is started.
The boat will continue to spiral until the or AUTO key is pressed.
Note: In the NAV mode, if the boat does not enter the arrival alarm area, the NAVpilot
does not switch to the next waypoint. To prevent this, set the arrival alarm range as
large as possible and activate the perpendicular function on the chartplotter.
Radius
(set on the menu)
Radius (set on the menu)
Distance between spiral centers
Distance between spiral centers (NM)
6.28 × Radius
Spiral Speed (set on the menu)

Table of Contents

Other manuals for Furuno NAVpilot-711C

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Furuno NAVpilot-711C and is the answer not in the manual?

Furuno NAVpilot-711C Specifications

General IconGeneral
BrandFuruno
ModelNAVpilot-711C
CategoryAutopilot System
LanguageEnglish

Related product manuals