Furuno NAVpilot-711C - Specifications

FURUNO NAVpilot-711C
SP - 1 E7278S01C
140909
SPECIFICATIONS OF AUTOPILOT
NAVpilot-711C
1 CONTROL UNIT
1.1 FAP-7011C
Display 4.1-inch TFT color LCD
Effective display area 82.56 x 61.92 mm, QVGA (320 x 240 dot)
Backlight 8 steps
Brilliance 700 cd/m
2
typical
1.2 FAP-7001 (option)
Display 3.8-inch monochrome dot matrix LCD
Effective display area 85.2 x 43.6 mm (160 x 80 dot)
Backlight 8 steps
Contrast 16 steps
2 PROCESSOR UNIT
2.1 Steering mode STBY, Auto, Dodge, Turn, Remote, Advanced auto*, Navigation*,
Wind*, FishHunter
TM
*
2.2 Weather mode AUTO, MANUAL-CALM/ MODERATE/ ROUGH
2.3 Rudder gain AUTO/1-20 (Manual)
2.4 Counter rudder AUTO/0-20 (Manual)
2.5 Trim gain AUTO/1-20 (Manual)
2.6 Course change speed 1-30 deg/s
2.7 Rudder angle settings 10-45 deg
2.8 Alarm Heading deviation, Cross-track error*, Ship’s speed*, Depth*,
Water temperature*, Wind*, Watch, Log trip*
2.9 Motor/ Solenoid drive 25A continuous, 50A for 5 seconds
2.10 Clutch/ Bypass drive 3A
㩷 *: external data required
3 IPS INTERFACE UNIT (OPTION)
3.1 Control system EVC system
3.2 Steering mode Auto, Manual, Dodge, Turn, Remote, Advanced auto*, Navigation*,
Wind*, FishHunter
TM
*, Override (*: external data required)
3.3 Rudder function Weather status, Rudder angle, Rudder gain, Trim gain,
Course change speed (setting range: same as processor unit)
4 INTERFACE
4.1 Number of port
NMEA0183 2 ports (includes the port for IPS interface unit)
CAN bus 1 port
Relay contact output 2 ports, alarm and status, 30V max., 3A max.