Furuno NAVpilot-711C User Manual

FURUNO NAVpilot-711C
SP - 2 E7278S01C
140909
Contact signal input 2 ports, event switch control
USB 1 port, for maintenance only
4.2 Data sentences NMEA 0183 Ver1.5/2.0/3.0
Input AAM, APB, BOD, BWC, BWR, DBT, DPT, GGA, GLL, GNS, HDG,
HDM, HDT, MTW, MWV, ROT, RMB, RMC, THS, TLL, VHW,
VTG, VWR, VWT, XTE, ZDA
Output DBT, DPT, GGA, GLL, GNS, HDG, HDM, HDT, MTW, MWV, RMB,
RMC, ROT, RSA, VHW, VTG, VWR, VWT, ZDA
4.3 CAN bus PGN (NMEA2000)
Input 059392/904,060928,061184,126208/720/992/996,
127250/251/258/488/489,128259/267,
129025/026/029/033/283/284/285,
130306/310/311/312/313/314/577/880/818/821/827
Output 059392/904,060928,061184,126208/464/720/992/996,
127237/245/250/251/258,128259/267,
129025/026/029/033/283/284/285,
130306/310/311/312/822/823/827
5 POWER SUPPLY
5.1 Processor unit (w/ control units) 12-24 VDC: 4.0-2.0 A (control unit: 6 sets)
5.2 IPS interface unit 12-24 VDC: 0.4-0.2 A
6 ENVIRONMENTAL CONDITION
6.1 Ambient temperature -15°C to +55°C
6.2 Relative humidity 95% or less at 40°C
6.3 Degree of protection
Control unit IP56
Processor unit IP20
Rudder reference unit/ IPS I/F IPX5
6.4 Vibration IEC 60945 Ed.4
7 UNIT COLOR
7.1 Control/processor unit N2.5
7.2 Remote controller N3.0 (FAP-5552/6232), N1.5 (FAP-6212/6222)
7.3 Rudder reference unit N1.5
7.4 Junction box/ IPS I/F N3.0

Furuno NAVpilot-711C Specifications

General

Brand	Furuno
Model	NAVpilot-711C
Category	Autopilot System
Language	English