Furuno NAVpilot-711C User Manual

2. STEERING MODES
2-25
2.9 DODGE Mode
The DODGE mode is useful in situations where you need to quickly take control of the
helm to avoid an obstruction.
To use the DODGE mode, set [Arrow Key] to [Dodge] on the [System Setup] menu.
2.9.1 How to dodge in the AUTO and NAV modes
Press the or key down to steer appropriately until the boat has cleared the
obstruction. The equipment goes into the DODGE mode and the audible alarm sounds
when one of the above keys is operated, to alert you to dodge operation. Note also
that " " appears at the top left corner of the display. To quit the DODGE
mode, release the or key.
2.9.2 How to FU dodge in the STBY mode
Press the or key simultaneously to steer appropriately until the boat has
cleared the obstruction. The equipment goes into the FU mode, and " " appears
at the top left corner of the display. Rotate the Course control knob to set the course.
To escape from the FU mode, press the key.
Note: FU dodge mode is not available with Fantum Feedback
™
.
2.9.3 How to NFU dodge in the STBY mode
Non-Follow up (NFU) is a manual steering mode that moves the rudder as long as the
or key is operated. At this time, " " appears at the top left corner of the
display. To quit the NFU mode, release the key.

Furuno NAVpilot-711C Specifications

General

Brand	Furuno
Model	NAVpilot-711C
Category	Autopilot System
Language	English