Furuno NAVpilot-711C User Manual

2. STEERING MODES
2-37
2.12 OVRD mode (for EVC system)
When the EVC system controls the rudder, the OVRD (override) mode is automatically
enabled. The autopilot can not control the vessel in the OVRD mode.
Note: The OVRD mode is enabled for the EVC system equipped vessel only.
OVRD mode activation in the STBY mode
When the OVRD mode activates in the STBY mode, [OVRD] appears at the top-left
position of the display. At this time only the [Installation Menu] window and user menus
are operative. When the EVC system releases control of the rudder, the autopilot goes
to the STBY mode.
OVRD mode activation in the AUTO or NAV mode
When the OVRD mode activates in the AUTO or NAV mode, the audio alarm sounds,
the message “EVC Override” appears, and the mode indication at the top-left position
of the display shows [OVRD]. Press any key to stop the alarm and erase the pop-up.
When the EVC system releases control of the rudder, the autopilot goes to the STBY
mode.
N
30
330
300
359°
HDG
T
359°
HDG
T
When the EVC system releases
control of the rudder.
N
30
330
300
359°
HDG
T
359°
HDG
T
EVC Override
359°
HDG
T
When the EVC system releases
control of the rudder.
Press any key.

Furuno NAVpilot-711C Specifications

General

Brand	Furuno
Model	NAVpilot-711C
Category	Autopilot System
Language	English