Galaxy Hunter Series User Manual

22
4.3.2.3 Scan
Scan means the camera moves horizontally at a certain speed between the configured left and
right limits.
Step 1 Select Setting > PTZ settings > Function > Scan.
The Scan interface is displayed. See Figure 4-10.
Figure 4-10 Scan
Step 2 Select the scan number, and set the speed.
Step 3 Click Setup to set left limit and right limit.
1) Click Set Left Limit to set the current position to be the left limit.
2) Click Set Right Limit to set the current position to be the right limit.
Step 4 Click Start to start scanning.
Click Stop to stop scanning.
4.3.2.4 Pattern
Pattern means a recording of a series of operations that you make to the camera, and when
pattern starts, the camera performs the operations repeatedly. The operations include
horizontal and vertical movements, zoom and preset calling. Record and save the operations,
and then you can call the pattern path directly.
Step 1 Select Setting > PTZ settings > Function > Pattern.
The Pattern interface is displayed. See Figure 4-11.

Galaxy Hunter Series Specifications

General

Brand	Galaxy
Model	Hunter Series
Category	Network Hardware
Language	English