25
Step 2 Select the PTZ speed: Low, Middle, and High.
Speed under the direction buttons refers to the rotation angle of the PTZ camera for
each press of the direction button.
4.3.2.7 Idle Motion
Idle motion means that the PTZ camera implements the operation which is configured in
advance when it does not receive any valid command within the set time
Preparation
You have configured the PTZ motions, including preset, scan, tour, or pattern.
Procedure
Step 1 Select Setting > PTZ settings > Function > Idle Motion.
The Idle Motion interface is displayed. See Figure 4-14.
Figure 4-14 Idle motion
Step 2 Select the Enable check box to enable the idle motion function.
Step 3 Select the idle motion and set the idle time.
You need to select the corresponding number for some selected idle motions, such as
Preset001.
Step 4 Click Save
To Next Page
Loading...
Need help?
General