Gallagher PULSE Series - Totes; Reload Configuration - CONFIG; Restart Central Controller - REBOOT

SERVICING
100
PULSE Installaon, Commissioning and Servicing Manual - Revision 19
15.18 Totes
This menu item allows you to save current tote values from the Central
Controller to the Stack Controller and restore tote values from the
Stack Controller back to the Central Controller. This can be used when
swapping the Central Controller board out to avoid losing the current
tote values.
NOTE: If Restore is used when the saved totes are out of date the
current Central Controller totes will be overwritten with the outdated
ones.
Press 4 or 6 to scroll between SAVE and RESTORE
Press F to action the save to the Stack Controller and F to confirm.
Press F to restore totes to the Central Controller and F to confirm.
Press
to exit return to the main menu.
15.19 Reload Configuration - CONFIG
The dispenser configuration can be restored from the SD card or backed
up from the dispenser to a new SD card.
Press F to reload the configuration from the SD card or
to cancel.
Press F again to confirm or
to cancel.
Press 4 or 6 to scroll from RESTORE to BACKUP.
Press F to copy the config file from the internal memory of the Central
Controller back to the SD card as Config.XML.
Press F to confirm or
to cancel.
The CONFIG function will cause the Service Mode to be exited, any
changes saved, and then the dispenser to be restarted.
If the config cannot be backed up FAIL will appear.
C
L
CC
C
L
CONFIRM
REBOOT
CC*
C
L
C
L
CONFIRM
RESTORE
CONFIG
RESTORE*
C
L
BACKUP
CONFIG
CONFIRM
L
BACKUP*
L
FAIL
CONFIG
L
SAVE
TOTES
RESTORE
TOTES
15.20 Restart Central Controller - REBOOT
This function restarts the Central Controller.
The Dollars window shows REBOOT and the Litres window CC. Press F
to restart and F again to confirm restart or
to cancel.
The dispenser will leave Service Mode, saving any changes made before
restarting the Central Controller.
$
L
$
$
$
$
$
$
$
$
Version 1.20