142 143
IIDTool
GAP Diagnostic 2023-09-12 All Rights Reserved
User Manual G3 units : Version 37, Firmware V4.0
Figure 71. LV : Modify a live value name in a favorite list.
Click on the live value name to change it.
Figure 72. LV : Favorite live values selection
The Save button is used to save the current live value selec-
tion. In this example, 3 live values are selected.
The Load button is used to recall the last saved selection from
the list. All 3 live values will be selected at once.
To Next Page
Loading...
