Gap Diagnostic IIDTool Pro G3 - Layout Definition; Main Screen Layout

86 87
IIDTool
GAP Diagnostic 2023-09-12 All Rights Reserved
User Manual G3 units : Version 37, Firmware V4.0
4.4.4 Layout denition
Main screen layout
Figure 45. Height function layout
Front Axle, 0-
>
25: current height, 0 mm, or default in this example is shown on the left while the selec-
ted height setting (My o󰀨road height in this example) is shown right, + 25 mm
.
Rear Axle, 0-
>
30: current height, 0 mm, or default in this example is shown on the left while the selec-
ted height setting (My o󰀨road height in this example) is shown right, + 30 mm
.
Press and hold on the height setting to edit it. The Default value is the original backup up value upon
rst connection of the tool to a vehicle and cannot be edited. L322-02 Other height modes are also