82
IIDTool
GAP Diagnostic 2023-09-12 All Rights Reserved
User Manual G3 units: Version 37, Firmware V4.0
4.3.3 Sub-Function “ Advanced Read ”
Denition
Advanced function helping to achieve further diagnosis in more complex scenarios.
Purpose :
This function allows setting the lter to indicate which status bit to consider when reading faults.
Usage :
• Analyze the conditions that could have contributed to triggering the conrmed fault.
• Check if tests are completed following a clear fault (repair) and after performing drive cycles (if
applicable).
• Especially interesting in the presence of intermittent problems.
Principle :
Create a lter to guide and impose verications on a specic system.
CAUTION
The Advanced Read function should be used only by knowled-
geable people or professional automotive technicians. It is a
complement to assist in the diagnosis of more complex pro-
blems.
To access the Advanced Fault Reading and modify the lters in the app, it is necessary to select the
Faults function beforehand. Then press Advanced Mode and tick the desired bits.
To Next Page
Loading...
