Gap Diagnostic IIDTool Pro G3 - Functions Classification

22
IIDTool
GAP Diagnostic 2023-09-12 All Rights Reserved
User Manual G3 units: Version 37, Firmware V4.0
Some functions refer to the IIDTool itself.
IIDTool settings
IID Cong
Table 2. Functions categorized by Objectives (continuation)
1.4.2 Functions classication
The functions are divided into two classes. This distinction a󰀨ects the access level of IIDTool functions.
Full diagnostic capability Advanced programming functions*
Reading and clearing fault codes Systems and components calibrations
Live values Height (air suspension)
Control IOs
Changing congurations or parameters of the vehicle
(CCF)
Service routines
Changing congurations or parameters of individual
ECUs (L322-02, L322-06 and L316)
Height control Key programming
ECU info ECU update, Re-Flash, DPF Regen
Engine re-mapping, EGR (exhaust gas recirculation)
blanking, speed limit modication and more **
Save/Restore (suspension and congurations)
Table 3. Functions classication
*Advanced programming functions are only accessible once the tool is activated (section 2.2 and sec-
tion 2.9).
**Sold separately by Bell Auto Services (BAS Remaps) and delivered by the IIDTool. Please visit http://
bellautoservices.co.uk/ for more details.