Gap Diagnostic IIDTool Pro G3 - Available Re-Flash Services

To Next Page

To Previous Page

166 167

IIDTool

User Manual G3 units : Version 37, Firmware V4.0

4.11.4 Available Re-Flash

Engine Remaps, EGR blanking and the likes.

All IIDTools are now capable of transporting products designed and sold by the good people of BAS

Remaps (Bell Auto Services). For more details, please visit their website at:

http://bellautoservices.co.uk/

or send them an e-mail at tech.bas2@gmail.com

Table 32. Risk, Engine Remaps, EGR blanking and the likes

Prerequisites

• Have access to a Mac or PC computer connected to the Internet

• Having installed the updater software (section 2.3)

• Ensure that the updater software installed is at version 4.6 (PC), 4.1 (Mac) or higher.

• Pro Ensure the rmware of IIDTool is at least the compiled version in 2454. Else, simply pro-

ceed with updating the IIDTool Pro. See section 2.5.

Step 1: Providing BAS with the required information

In order to build a personalised le, BAS Remaps will need to know the current ECU information and

vehicle identication number (VIN). After initial contact with BAS, retrieve the ECU information (IIDTool

Menu-

ECU Info-

Engine) and send them to BAS Remaps at tech.bas2@gmail.com. Make sure your

vehicle identication number (VIN) is visible in the email header or subject line (BT/Pro not hidden or

obfuscated).

Risk Level Consequences Recovery Method Precautions

Moderate Engine will not start

Repeat reashing

procedure

None

Related product manuals