EasyManua.ls Logo

Gap Diagnostic IIDTool Pro G3 - Fast Lane Service

Default Icon
188 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
170
IIDTool
GAP Diagnostic 2023-09-12 All Rights Reserved
User Manual G3 units: Version 37, Firmware V4.0
Fast Lane Service
The re-ash module allows the tools to reash any ECU with updates. The GAP Fast Lane Service
ensures that the correct update le for the current software level, hardware, mechanical components,
and geographic market is chosen. There is a 25 GBP per ECU administrative charge for non-Pro units
to cover the le selection process. This service is free of charge since covered by the annual IIDTool
Pro subscription. GAP Fast Lane Service ensures that customers receive the most up-to-date ECU
les for their vehicle conguration within hours (excluding weekends and holidays). ECU updates
already covered in the present IIDTool services (EAS electronic air suspension for example) remain
free of charge.
Unless there is an issue to x with the car, we suggest leaving ECUs alone.
Table 33. Risk, fast lane service
Prerequisites
Have access to a Mac or PC computer connected to the Internet
Having installed the updater software (section 2.3)
Ensure that the updater software installed is at version 4.6 (PC), 4.1 (Mac) or higher.
Pro Ensure the rmware of the IIDTool is at least on build 2454.
BT, on build 2080 or higher.
Else, simply proceed with updating the IIDTool. See section 2.5.
Providing GAP Diagnostic with the required information
The vehicle identication number (VIN) and information on the current rmware are required.
Retrieve ECU information (ECU) ECU using the information function (section 4.12), and send
them to GAPTeam@GAP-Diagnostic.com. Ensure the vehicle identication number (VIN) is
visible in the header or email subject line (not concealed or hidden).
Updating your IIDTool with the custom rmware and re-ashing the ECU
Once you have received conrmation that the le is ready, simply follow the instructions found on
Step 3: Updating your IIDTool with the custom remap, EGR blank or other and onwards.
Risk Level Consequences Recovery Method Precautions
Moderate Varies
Repeat reashing
procedure
Usual precautions
shall be taken

Table of Contents

Related product manuals