Gap Diagnostic IIDTool Pro G3 - Faults Reading and Decoding

76
IIDTool
GAP Diagnostic 2023-09-12 All Rights Reserved
User Manual G3 units: Version 37, Firmware V4.0
4.3 Function “ Faults ”
This function is split into 3 sub functions; “Read Faults”, “Clear Faults” and “Advanced Read”.
4.3.1 Sub-Function “ Read and Clear Faults ”
Denition
This diagnostic function gives access to the list of currently stored faults in covered ECUs. It helps,
following the reading, to identify the source of the problem.
The app allows changing and saving the type of faults displayed by default. See section 4.3.4 for more
details.