2
IIDTool
GAP Diagnostic 2023-09-12 All Rights Reserved
User Manual G3 units: Version 37, Firmware V4.0
Terms and conditions
Do not copy or reverse engineer
While considerable eort has been made to make the information provided in this section as complete
and accurate as possible, it does not and cannot cover all possible situations. The authors cannot ac-
cept any responsibility for any damages which may occur from the use or misuse of these procedures,
nor can the authors accept any responsibility for any damages which may result from personal injury
or property damage which allegedly may be caused by the use or misuse of these procedures. No
responsibility is accepted for missing or incorrect information. Those who use these procedures shall
accept all responsibility for performing the work which may be described below.
Specications are subject to change without prior notice.
Suggestions
For convenience and even security purposes, it is suggested that the user keeps an updated version
of this manual in PDF format on his or her mobile devices. Thus, accessibility to procedures will be
possible anywhere and anytime. By the same token, the computerized version facilitate searching for
a particular topic.
You can proceed to download the User’s Manual on the manufacturer’s website :
https://www.gap-diagnostic.com/support/documents/IIDTool/
The manual is updated regularly.
Additional information on specic vehicle modication for example can be found in our FAQ :
https://www.gap-diagnostic.com/faq/
And product page:
https://www.gap-diagnostic.com/products/iidtool/
To Next Page
Loading...