ZP3 Fire Control Panel Installation, Commissioning and Maintenance Manual
REV 11 (ISS 08/03/2010) Page 1
Chapter 1: Installation overview
Introduction
The ZP3 fire control panel (see Figure 1) is a state-of-the-art analogue addressable panel that
complies with the EN54 parts 2 and 4 standards. It is a compact microprocessor controlled unit,
of modular design. Hardware and software modules enable you to configure virtually any system
requirement. The panel uses non-volatile flash memory, and can be programmed on-site directly
via the keypad, or by means of a notebook computer.
Figure 1: ZP3 Fire control panel
To Next Page
Loading...
