GE Security ZP3 - Internal Features; Figure 5: ZP3 Fire Control Panel

To Next Page

To Previous Page

ZP3 Fire Control Panel Installation, Commissioning and Maintenance Manual

Page 10 REV 11 (ISS 08/03/2010)

Internal features

Figure 5 shows the internal features of the basic ZP3 panel with additional detail. All components

are carried on two main modules; the internal chassis holds the main board and processor board,

and the door-assembly holds the display board, the zone board, the keyboard, and the Zport1

connection.

Figure 5: ZP3 Fire control panel – internal features

Legend:

Item Description Item Description

1 Door assembly 5 Main terminals

2 Main chassis 6 Mains 230 VAC connections

3 Batteries 7 Mains fuse

4 Wiring entering system 8 Mains filter

The panel is divided into three main modules, namely the chassis, the door assembly, and the

cabinet. The basic electrical installation can be carried out using the cabinet only, which has the

required conduit entry points at the top and back. Optional hardware is available for different

installation requirements.

GE Security ZP3 - Internal Features; Figure 5: ZP3 Fire Control Panel - Internal Features