ZP3 Fire Control Panel Installation, Commissioning and Maintenance Manual
Page 78 REV 11 (ISS 08/03/2010)
Option Description
S/ware upgrade Selecting this option allows you to load new operating software into the panel from a PC.
Loading new software does not lose or affect configuration programming.
Debug comms View data received on Z-Port 1 and 2 or other diagnostic information on other virtual
ports.
Panel hardware Defines the hardware configuration, ie, loops, zones, and power options.
Clr alrm counters Resets the alarm counters to zero.
Language The ZP3 panel has facilities for 2 languages, English and one extra language. This menu
defines the default language that the panel will use. An alternative foreign language may
be loaded - applicable to software version 3.02 and higher. This was not available on
version 3.00. Note that the appropriate version language file must be used.
Refer also to the ZP3 language loading procedure, which may be found in the Planner
User Guide, document number 503-1436ZE-U-05
To Next Page
Loading...
