GE Krautkramer USM 35X - Page 212

Technical specifications according to EN 12668-1
Technical specifications according to EN 12668-1Technical specifications according to EN 12668-1
Technical specifications according to EN 12668-1
Description
DescriptionDescription
Description Symbol
SymbolSymbol
Symbol Dimension
DimensionDimension
Dimension Min
MinMin
Min Average
AverageAverage
Average Max
MaxMax
Max Comment
CommentComment
Comment
USM 35X S_TM036060001_D-10 GE Inspection Technologies
» Display width
» Display width» Display width
» Display width mm - 0,5
to
9999
-
»» Fixed ranges mm - 55 -
»» Display start mm - -10
to
900
- Display start
»» Probe delay ás - 0
to
199,99
-
»» Automatic Calibration - yes - 2 step
calibration
» Material velocity
» Material velocity» Material velocity
» Material velocity m/s - 1000
to
15000
- Resulation 1m/s
» Unit of measurement
» Unit of measurement» Unit of measurement
» Unit of measurement - mm,
inch
-
» Linearity of time base
» Linearity of time base» Linearity of time base
» Linearity of time base % 0,5 0 0,5
» Trigonometry
» Trigonometry» Trigonometry
» Trigonometry - - -
»» Angle of incidence ° - 0 - 90 - Resulation 0,1
»»» Increments ° - 0,1 - Increments
»» X-value mm - 0 - 100 - Distance:
index point to
probe front edge
»» Object thickness mm - 1 - 9999 - To calculate
Sound Reflection
Technical specifications according to EN 12668-1
Technical specifications according to EN 12668-1Technical specifications according to EN 12668-1
Technical specifications according to EN 12668-1
Description
DescriptionDescription
Description Symbol
SymbolSymbol
Symbol Dimension
DimensionDimension
Dimension Min
MinMin
Min Average
AverageAverage
Average Max
MaxMax
Max Comment
CommentComment
Comment
USM 35X S_TM036060001_D-10 GE Inspection Technologies
» Display width
» Display width» Display width
» Display width mm - 0,5
to
9999
-
»» Fixed ranges mm - 55 -
»» Display start mm - -10
to
900
- Display start
»» Probe delay ás - 0
to
199,99
-
»» Automatic Calibration - yes - 2 step
calibration
» Material velocity
» Material velocity» Material velocity
» Material velocity m/s - 1000
to
15000
- Resulation 1m/s
» Unit of measurement
» Unit of measurement» Unit of measurement
» Unit of measurement - mm,
inch
-
» Linearity of time base
» Linearity of time base» Linearity of time base
» Linearity of time base % 0,5 0 0,5
» Trigonometry
» Trigonometry» Trigonometry
» Trigonometry - - -
»» Angle of incidence ° - 0 - 90 - Resulation 0,1
»»» Increments ° - 0,1 - Increments
»» X-value mm - 0 - 100 - Distance:
index point to
probe front edge
»» Object thickness mm - 1 - 9999 - To calculate
Sound Reflection