Need help?Do you have a question about the GE MP100 Series and is the answer not in the manual?
General| Model Series | MP100 Series |
|---|---|
| Manufacturer | GE Healthcare |
| Display Type | LCD |
| Parameters Monitored | ECG, SpO2, NIBP, Temperature, Respiration |
| SpO2 Measurement Range | 0-100% |
| Battery Backup | Yes |
| Alarms | Audible and visual alarms for all parameters |
| Category | Medical Equipment |
| Display Size | 10.4 inches |
| ECG Channels | 3-lead or 5-lead |
| Respiration Measurement Range | 0-120 breaths per minute |
| Power Supply | AC 100-240V, 50/60Hz |
| Weight | Approx. 4.5 kg (without battery) |
| Connectivity | Ethernet |
Covers license agreements, intended use, safety, and identification of the system.
Explains the manual's purpose, intended audience, related documents, and conventions used.
Defines hazard terms (Danger, Warning, Caution) and lists safety warnings for proper use.
Identifies and describes the main hardware parts like the processor box, primary display, and speakers.
Explains the functional description, block diagram, and data handling of the CIC Pro center.
Covers patient monitoring networks and web access server networks.
Details the necessary licenses for various CIC Pro center configurations.
Lists and describes the different software licenses and packages.
Outlines procedures for activating software licenses via USB or service PC.
Explains direct and network methods to access service interfaces.
Explains clinical and administrator operating modes for accessing system functions.
Lists usernames and passwords for accessing Webmin, CLI, and Windows utilities.
Lists essential tasks to perform before physical installation, including setup and inspection.
Provides step-by-step instructions for mounting, connecting, and powering on the equipment.
Describes desktop and rack-mount installation strategies and restrictions.
Outlines network requirements and instructions before configuring the system.
Covers network IP, printers, Citrix, language, and browser configurations.
Details settings for telemetry, alarms, and display configurations.
Covers backing up and restoring care unit and custom default configurations.
Lists procedures to verify configuration settings, licenses, and software.
Details checkout steps for specific Field Replaceable Units (FRUs) like drives and USB devices.
Explains the system resource indicator's colors, meanings, and restart procedures.
Lists common error messages and their probable causes and recommendations.
Addresses blank, blue, and red screen issues, and incorrect colors.
Troubleshoots issues related to MultiKM license activation failures.
Illustrates the internal components of desktop and rack-mount units.
Provides detailed steps for replacing components like CPU, drives, and fans.
Recommends maintenance intervals and specific checks for optimal system health.
Covers ground continuity, impedance, leakage current, and enclosure tests.
Provides steps for safely restarting the system based on resource indicator status.
Outlines the steps for re-imaging drives and reloading software.
Provides instructions for preparing a USB memory stick for software reload.
Details instructions for re-imaging and restoring the CIC Pro center software.
Introduces software upgrades, package files, and activation procedures.
Details steps to prepare the service PC for software transfer and installation.
Guides on selecting and transferring software packages to target centers.
Explains how to activate installed software packages via Webmin.
Discusses system design for EMC compliance and potential interference sources.
Details compliance levels for various immunity tests like ESD, Burst, and Surge.
Summarizes information associated with data modules in the Backup-Restore window.
Lists compatible devices and versions for CIC Pro center v5.1.x.
Lists compatibility information for other GE systems with the CIC Pro center.
To Next Page
