GE MP100 Series User Manual

6-78 CIC Pro™ 2026419-033E
Configuration
NOTE
If you connect more than one mouse to a configured mouse group, always
position the additional mice on a flat surface. Otherwise, erratic mouse
movements and behaviors may result.
NOTE
All CIC Pro center devices in the MultiKM group have to be of the same version.
 In any given CARESCAPE Network, many Multimouse groups can co-exist
as long as each individual group’s devices are the same CIC Pro center
version. (Example: all CIC Pro center v5.0.x in one group and all CIC Pro
center v5.1.x in another group.)
 If a CIC Pro center is swapped from an existing Multimouse group A, ensure
that the new CIC Pro center is the same version as the other CIC Pro centers
in the Multimouse group A.
NOTE
If the MultiKM license is activated, you must position the mouse cursor in the
CIC Pro center patient window where the user action is to take place.
NOTE
The use of Multimouse and MultiKM names appear in both this manual and in
the software application. Please be aware that these names refer to the same
licensed software application, MultiKM.
With the MultiKM license activated, you can do the following tasks:
 Move the mouse across all of the CIC Pro centers in the group.
 Support right and left mouse clicks and scroll wheel movement.
 Access any CIC Pro center’s display screen or enter text into any of the CIC Pro
center’s text fields in the group.
This section describes the procedures required to configure a keyboard and mouse
group:
 Pre-configure the CIC Pro centers on page 6-78.
 Configure the keyboard and mouse group on page 6-80.
 Change a keyboard and mouse group on page 6-83.
 Add a CIC Pro center to an existing keyboard and mouse group on page 6-
83.
 Divide a mouse and keyboard group into two groups on page 6-84.
 Combine two keyboard and mouse groups into one group on page 6-87.
Pre-configure the CIC Pro centers
When configuring a keyboard and mouse group, you can use one or more sets of mice
and keyboards. If you use a pair of mice and keyboards across multiple CIC Pro
centers, just connect or disconnect the mouse and keyboard from each CIC Pro center
as you configure a keyboard and mouse group.

GE MP100 Series Specifications

General

Brand	GE
Model	MP100 Series
Category	Medical Equipment
Language	English