Configuration
2026419-033E CIC Pro™ 6-87
d. Verify that the MultiKM application is running on each CIC Pro center in the
keyboard and mouse group. If there are problems, see MultiKM issues on
page 8-10.
Combine two keyboard and mouse groups into one group
At any time, you may combine two keyboard and mouse groups into one group:
1. Identify the computer groups you want to combine (e.g., Group 1: A, B, C and
Group 2: D, E, F).
2. Go to CIC Pro center A. (The CIC Pro center that will have the keyboard and
mouse connected.)
3. If you have not already logged onto Webmin, Log on to the Webmin service
interface on page 4-7.
4. Click Configuration > MultiKM > Configure and start the MultiKM
application.
5. Repeat the configuration starting with step 5. See Configure the keyboard and
mouse group on page 6-80.
6. Complete step 2 to step 5 on CIC Pro centers D, E, F, B and C.
7. Go to CIC Pro center A. Verify that all the CIC Pro center computer names are
listed and then click Next.
8. Click and drag the location of the computer names to match the physical layout
of the CIC Pro center displays in this group.
9. Click Hide to hide the Multimouse application window. The MultiKM
application should be active on all of the CIC Pro centers in the configured
keyboard and mouse group.
10. Verify that the MultiKM application is running on each CIC Pro center in the
keyboard and mouse group. If there are problems, see MultiKM issues on page 8-
10.
To Next Page
Loading...
Need help?
General
