2-8 CIC Pro™ 2026419-033E
Equipment overview
Secondary display
The secondary display supports patient data review functions and can be configured
to display CIC Pro center applications in full screen or half screen formats. Using a
secondary display provides more room for real-time patient monitoring in the primary
display.
From a secondary display, you can do the following:
View all of the single patient viewer applications.
View two single applications at the top and bottom half of the screen.
View all applications (excluding multi-patient viewer) in this secondary display.
View web and Citrix (if enabled) applications.
Navigate between applications via the enhanced software tools provided.
Access custom views of routine applications using a single mouse click.
The following requirements apply when using a secondary display with your CIC Pro
center:
Secondary displays must be the same type and the same size as the primary
display. For a list of displays that are validated for use with the v5.1.x CIC Pro
center, refer to Touchscreen display video drivers on page 6-32.
Secondary displays and primary displays must be set to the same 1280 x 1024
display resolution. No other display resolutions have been validated for use with
the v5.1.x CIC Pro center.
Secondary displays will not function until you have first completed the following
tasks:
Activated the required licenses.
Restarted the CIC Pro center.
To configure the secondary display, see Configure a secondary display on page 6-30.
To Next Page
Loading...
Need help?
General
