5-8 CIC Pro™ 2026419-033E
Installation
Installation process
Precautions
WARNING
ELECTRIC SHOCK— To avoid electric shock, the CIC Pro center
and its accessories should not be placed within the patient
environment, which is a volume related to an object (bed, chair,
table, treadmill, etc.) where a patient is intended to be diagnosed,
monitored, or treated.
WARNING
LOSS OF ALARMS — CIC Pro center V5.1 x is in-unit compatible
with CIC Pro center V4.0.7 or later. It is not in-unit compatible with
versions of CIC Pro center V3.1 or earlier and is not in-unit
compatible with any versions of Centralscope. Sharing of the same
care unit name across central stations having incompatible software
versions can result in lost or corrupted telemetry alarm defaults data
and loss of audible alarms. See Device compatibility on page C-1.
WARNING
LOST OR INTERMITTENT COMMUNICATION — Do not
exceed a maximum of 15 CIC Pro centers in a single logical care
unit.
Attempting simultaneous displays of a patient monitor (bedside or
telemetry) at too many CIC Pro centers may cause lost or
intermittent communication between CIC Pro centers and the
patient monitor. This is evidenced by NO COMM or intermittent
communication conditions for the beds.
The maximum CIC Pro centers viewing a patient bedside monitor
can vary depending on bedside monitor capabilities and network
design.
Both hard-wired and telemetry beds are limited in the number of
remote view connections that can be supported.
There are limitations for the device quantity supported by the
CARESCAPE Network. Please contact GE for guidance on
CARESCAPE Network construction.
To Next Page
Loading...
Need help?
General
