GE MP100 Series User Manual

6-8 CIC Pro™ 2026419-033E
Configuration
 Click the Internet Explorer icon and log into Webmin. See Log on to the Webmin
service interface on page 4-7.
 Set the network IP address on page 6-12.
 Configure network laser printers on page 6-14.
 Install a network laser printer on page 6-14.
 Delete a network laser printer on page 6-16.
 Configure the server for remote connectivity on page 6-16.
 Configure the Remote Service settings on page 6-16.
 Enable or disable the Remote Service Agent on page 6-18.
 Set up a Citrix client on page 6-19.
 Define browser favorites on page 6-21.
 Configure set flags settings on page 6-22.
 Configure the NO COMM alarm setting, if applicable on page 6-22.
 Configure force age setting, if applicable on page 6-23.
 Configure multiviewer alarm audio setting, if applicable on page 6-24.
 Configure ADU alarm audio setting, if applicable on page 6-26.
 Configure the CIC Pro center language on page 6-27.
Configure desktop-related settings
 Configure USB laser printers on page 6-28.
 Configure HP LaserJet 2430 and HP LaserJet P3005 USB printers on page
6-28
 Configure HP LaserJet P3015 USB printers on page 6-29
 Set the laser printer default paper size on page 6-30.
 Configure a secondary display on page 6-30.
 Calibrate a touchscreen display on page 6-32.
 Set the time zone on page 6-34.
 Restart the CIC Pro center. Complete step 4 of Perform safe restart of the CIC
Pro center on page 8-30
Configure clinical application settings
NOTE
All clinical setting values must be received from the GE Clinical Application
Specialist (CAS) or from the nursing director of the care unit.
 Configure USB laser printers on page 6-28.
NOTE
This step may be performed at a later date if desired.

GE MP100 Series Specifications

General

Brand	GE
Model	MP100 Series
Category	Medical Equipment
Language	English