6-26 CIC Pro™ 2026419-033E
Configuration
Configure ADU alarm audio setting, if applicable
NOTE
All clinical setting values must be received from the GE CAS or from the nursing
director of the care unit. Consult with your CAS or hospital staff about the use of
these functions and if they should be used with your configuration.
CAUTION
OUT-OF-UNIT ALARMS — If the CIC Pro center is configured to
alarm for out-of-unit alarms, any patient displayed on that out-of-
unit CIC Pro center, and is alarming, can have their alarms silenced
from the out-of-unit CIC Pro center.
CAUTION
AUDIBLE ADU ALARMS MAY NOT SOUND—Depending on
the configuration of your CIC Pro center, audible ADU alarms may
not sound at the CIC Pro center for any in-unit patient beds.
Only on-screen ADU alarm indicators display unless the CIC Pro
center is configured to also sound audible alarms.
Complete the following procedure to configure the ADU Alarm Audio setting on the
CIC Pro center:
1. If you have not already logged onto Webmin, Log on to the Webmin service
interface on page 4-7.
2. Click Configuration > Set Flags.
NOTE
The Set Flags Module screen shows the current set flags settings, which can
be modified.
3. Change the settings in the ADU ALARM AUDIO field as required:
To Next Page
Loading...
Need help?
General
