GE MP100 Series User Manual

Configuration
2026419-033E CIC Pro™ 6-5
3. Analyze the Check Centrals output:
a. Identify time zone or daylight saving time network errors:
 Verify that all the CIC Pro centers configured on the CARESCAPE
Network are listed.
NOTE
The target CIC Pro center running the Unity Time Zone Discovery
Tool utility is the baseline device used for determining time zone or
daylight saving time errors.
 If errors are identified for either the time zone (TZ) or daylight saving
time (DST) settings, correct the time zone settings as per instructions in
Set the time zone on page 6-34.
b. Identify CARESCAPE Network IX and MC addressing scheme errors:
 Verify the CARESCAPE Network IX and MC addressing schemes
match for all the CIC Pro centers on the CARESCAPE Network.
 If the addressing schemes do not match, complete Network IP address
configuration for each CIC Pro center that requires IP address changes,
as per instructions in the appropriate CIC Pro Clinical Information
Center Service Manual.
4. If there is any CIC Pro center hardware running v4.1.1 on the network, make sure
that the v4.1.1-1 patch is applied.
5. Make sure that only the following compatible CIC Pro center versions co-exist in
a given care area:
 CIC v5.1.x
 CIC v5.0.x
 CIC v4.1.1-1
 CIC v4.0.7 or CIC v4.0.8
NOTE
CIC Pro center hardware running v1.5, or any version of Central Scope, can
exist independently in a separate care area, but not in the same care unit
name with the software versions listed above.
6. If there is one or more Aware Gateway on the network, configure the Time
Master settings at the Aware Gateway. See the latest Aware Gateway Service
Manual for instructions. Consult Tech Support and hospital IT if any assistance is
required.
7. Investigate if there is any unauthorized, non-GE medical equipment connected to
the MC/IX network. If any unauthorized non-GE equipment is found or reported
to be connected to the CARESCAPE Network, read and understand the
following Warning and communicate this information to the hospital IT/
biomedical or clinical staff before proceeding further:

GE MP100 Series Specifications

General

Brand	GE
Model	MP100 Series
Category	Medical Equipment
Language	English