GE PACSystems RX7i - Page 331

Chapter 6. Service Request Function
316 PACSystems* RX7i, RX3i and RSTi-EP CPU Programmer's Reference Manual GFK-2950C
Format of Returned Data for Fault Table Entries
Format for Parameter Setting 0x80h & 0x81h
Controller Fault Table (0x80) Output Format
Address
I/O Fault Table (0x81) Output Format
High Byte
Low Byte
High Byte
Low Byte
Unused
Long/Short
Address+37
Reference address
memory type
Long/Short Value
Unused
Unused
Address+38
Reference address offset
Slot
Rack
Address+39
Slot
Rack
Task
Address+40
Bus address
I/O bus number (block)
Fault action
Fault group
Address+41
point
Error code
Address+42
Fault action
Fault group
Fault extra data
Address+43
Fault type
Fault category
Address+44
Fault extra data
Fault description
Address+45—
Address+54
Fault extra data
Minutes
Seconds
Address+55—
Address+58
(Time-stamp
in BCD
Format)
Minutes
Seconds
Day of month
Hour
Day of month
Hour
Year
Month
Year
Month
Milliseconds
Milliseconds
Not used
Address+59
Not used
Start of next fault output parameter block
Address+60
Start of next fault output parameter block