GE Analytical Instruments ©2009 102 of 236 DLM 90488-01 Rev. A
The data history list also displays the time of the analysis and the values for the items selected on
the Values screen. The date in the header reflects the date of the highlighted measurement at the
top of the list. For example, in Figure 15, the first line of data is highlighted, indicating the
measurement was taken on March 1, 2004. Scroll up and down through the Data History list with
the arrow keys, and move to the start or end of the list with the Start or End buttons.
Figure 15: Specifying a Start Date on the View Data Screen
To display a specific portion of the data history, press the Go To button, use the number pad to
enter the appropriate date and time settings, and then press the Back button. The first
measurement for the date you entered is displayed at the top of the list. If you enter a date or time
for which there is no data, the next closest date or time is displayed.
On the Data History screen, you also have the option to graph, export, and print data. See the
following sections for details on using these screens.
Graphing Data History
You can set the time scale for the data that is displayed on the graph and specify which data are
displayed. The settings you specify on the Graph screen also affect the graph that is displayed on
the Main screen.
To customize the graph, follow these steps:
Export
1 Mar 2004 TOC TC IC
08:53 1.62 PPB 1.93 PPB 0.31 PPB
08:49 1.62 PPB 1.93 PPB 0.31 PPB
08:45 1.62 PPB 1.93 PPB 0.31 PPB
08:41 1.62 PPB 1.93 PPB 0.31 PPB
08:37 1.62 PPB 1.93 PPB 0.31 PPB
08:33 1.62 PPB 1.93 PPB 0.31 PPB
08:29 1.62 PPB 1.93 PPB 0.31 PPB
08:25 1.62 PPB 1.93 PPB 0.31 PPB
Menu Graph Print Setup
View Data 4 Mar 2004 08:22
Go To
08:57 1.62 PPB 1.93 PPB 0.31 PPB
To Next Page
Loading...
